Skip to content 
This 2-flute square end mill is made from premium carbide and hardened to 55HRC for reliable machining of alloy and carbon steels. As an hrc55 square end mill, it combines sharp cutting edges with smooth chip evacuation, ensuring stable performance in side milling, slotting and light roughing. The rigid carbide square end mill body delivers long tool life, accurate dimensions and a clean surface finish in high-speed CNC applications.
Grade HN40 is made from submicron WC powder, some speclal additlves added to optimize theproperties with good combination of hardness and toughness.
Its suitable for making drills and miling tools for machining stainless steel, tool steel and heat-resistingalloys.
| Grade | Cobalt content % | Grain size | Density g/cm³ | Hardness HRA | Hardness HV30 | MPa Transverse rupture strength | MPa ·m1/2 Fracture toughness MPa ·m1/2 |
|---|---|---|---|---|---|---|---|
| HN40 | 10 | 0.8 | 14.45 | 91.8 | 1,580 | 3,600 | 11.8 |
| Scientific name | Composition | Physical properties | Features | Typical applications |
|---|---|---|---|---|
| TiSiN | Ti (titanium): main element, forms TiN nanocrystalline phase. Si (silicon): usually 6–10%, forms amorphous Si₃N₄ phase, refines grains and increases hardness. N (nitrogen): combines with Ti and Si to form a composite structure. | Colour: TiSiN coatings usually appear bronze or dark grey-bronze; exact colour depends on Si content, deposition process (such as PVD) and thickness (1–4 μm). Hardness: 34–42 GPa (≈3400–4200 HV). Friction coefficient: 0.3–0.6 (against steel). Temperature resistance: 1000–1200°C (oxidation resistance). Coating thickness: 1–5 μm (typically 2–3 μm). Deposition temperature: 200–400°C (suitable for carbide tools). | Ultra-high hardness: amorphous Si₃N₄ phase suppresses dislocation movement, giving much higher hardness than TiN (~23 GPa) and TiAlN (~35 GPa). High-temperature stability: suitable for dry cutting and high-speed machining (e.g. quenched steels HRC 60+). Anti-adhesion: reduces built-up edge when machining aluminium alloys, stainless steels and other sticky materials. | Tool coatings: drills, mills (especially suitable for PCB routers, tool life increased by 2–3 times). High-speed cutting of quenched steels, titanium alloys and high-nickel alloys. Mould strengthening: die-casting moulds and stamping dies, improving wear resistance. Industrial parts: piston rings and other high-temperature wear parts. |
A square end mill has a flat cutting edge and produces sharp 90° corners, making it ideal for slotting, side milling and pocketing. It is widely used in general machining of steel, stainless steel and aluminum.
An hrc45 square end mill is suitable for general steels and pre-hardened steels.
Hrc55 square end mill tools are used for higher-strength steels and longer tool life.
Hrc65 solid carbide square end mill is designed for hard milling of hardened tool steel and die steel where wear resistance is critical.
A square end mill corner radius has a small radius at the corner instead of a perfectly sharp edge. This radius helps reduce chipping, improves tool life and gives a slightly stronger cutting edge, especially useful in harder steels and continuous production.
Yes, we are a square end mill factory and wholesale square end mill manufacturer, offering both standard sizes and customized geometries. Coatings, flute numbers, corner radius and HRC grades can be tailored to your specific machining requirements.
Yes.
Yes. We can produce non-standard tools according to your drawings, samples or machining requirements (material, coating, size, tolerance and application). Our engineers will evaluate and provide a quotation and lead time.
For serious buyers and distributors, we can offer free standard samples if in stock. Usually you only need to cover the freight cost. For customized tools, a sample fee may apply, which can be refunded or deducted in bulk orders.
Regional or customer protection based on sales targets, avoiding price wars among our partners.
Catalogs, brochures, product photos, technical data sheets, online materials.
For key partners, joint promotion, exhibitions and digital marketing support.
Safety stock for fast-moving items and forecast-based production.
Priority production and regular shipments to reduce stock-out risk.
Clear quality warranty policy, quick response to claims.
Replacement, credit or other solutions after confirmation of issues.
Tool selection and cutting parameter advice.
Problem analysis for different materials and machines.
Online training, documents, and when possible, on-site support for key accounts.
Designed for high-rigidity cutting, this 4-flute square end mill is ideal for medium to finishing operations in alloy and carbon steels up to 55HRC. The dense flute layout of this hrc55 square end mill delivers excellent surface finish, reduced vibration and stable performance in side milling and profiling. As a durable carbide square end mill, it helps maintain tight tolerances in continuous CNC production.
Grade HN40 is made from submicron WC powder, some speclal additlves added to optimize theproperties with good combination of hardness and toughness.
Its suitable for making drills and miling tools for machining stainless steel, tool steel and heat-resistingalloys.
| Grade | Cobalt content % | Grain size | Density g/cm³ | Hardness HRA | Hardness HV30 | MPa Transverse rupture strength | MPa ·m1/2 Fracture toughness MPa ·m1/2 |
|---|---|---|---|---|---|---|---|
| HN40 | 10 | 0.8 | 14.45 | 91.8 | 1,580 | 3,600 | 11.8 |
| Scientific name | Composition | Physical properties | Features | Typical applications |
|---|---|---|---|---|
| TiSiN | Ti (titanium): main element, forms TiN nanocrystalline phase. Si (silicon): usually 6–10%, forms amorphous Si₃N₄ phase, refines grains and increases hardness. N (nitrogen): combines with Ti and Si to form a composite structure. | Colour: TiSiN coatings usually appear bronze or dark grey-bronze; exact colour depends on Si content, deposition process (such as PVD) and thickness (1–4 μm). Hardness: 34–42 GPa (≈3400–4200 HV). Friction coefficient: 0.3–0.6 (against steel). Temperature resistance: 1000–1200°C (oxidation resistance). Coating thickness: 1–5 μm (typically 2–3 μm). Deposition temperature: 200–400°C (suitable for carbide tools). | Ultra-high hardness: amorphous Si₃N₄ phase suppresses dislocation movement, giving much higher hardness than TiN (~23 GPa) and TiAlN (~35 GPa). High-temperature stability: suitable for dry cutting and high-speed machining (e.g. quenched steels HRC 60+). Anti-adhesion: reduces built-up edge when machining aluminium alloys, stainless steels and other sticky materials. | Tool coatings: drills, mills (especially suitable for PCB routers, tool life increased by 2–3 times). High-speed cutting of quenched steels, titanium alloys and high-nickel alloys. Mould strengthening: die-casting moulds and stamping dies, improving wear resistance. Industrial parts: piston rings and other high-temperature wear parts. |
A square end mill has a flat cutting edge and produces sharp 90° corners, making it ideal for slotting, side milling and pocketing. It is widely used in general machining of steel, stainless steel and aluminum.
An hrc45 square end mill is suitable for general steels and pre-hardened steels.
Hrc55 square end mill tools are used for higher-strength steels and longer tool life.
Hrc65 solid carbide square end mill is designed for hard milling of hardened tool steel and die steel where wear resistance is critical.
A square end mill corner radius has a small radius at the corner instead of a perfectly sharp edge. This radius helps reduce chipping, improves tool life and gives a slightly stronger cutting edge, especially useful in harder steels and continuous production.
Yes, we are a square end mill factory and wholesale square end mill manufacturer, offering both standard sizes and customized geometries. Coatings, flute numbers, corner radius and HRC grades can be tailored to your specific machining requirements.
Yes.
Yes. We can produce non-standard tools according to your drawings, samples or machining requirements (material, coating, size, tolerance and application). Our engineers will evaluate and provide a quotation and lead time.
For serious buyers and distributors, we can offer free standard samples if in stock. Usually you only need to cover the freight cost. For customized tools, a sample fee may apply, which can be refunded or deducted in bulk orders.
Regional or customer protection based on sales targets, avoiding price wars among our partners.
Catalogs, brochures, product photos, technical data sheets, online materials.
For key partners, joint promotion, exhibitions and digital marketing support.
Safety stock for fast-moving items and forecast-based production.
Priority production and regular shipments to reduce stock-out risk.
Clear quality warranty policy, quick response to claims.
Replacement, credit or other solutions after confirmation of issues.
Tool selection and cutting parameter advice.
Problem analysis for different materials and machines.
Online training, documents, and when possible, on-site support for key accounts.
HM Series 4 flutes square end mill is a high-performance square end mill designed for general steel and stainless-steel machining. The solid carbide square end mill body and optimized helix provide stable cutting, smooth chip flow and a clean surface finish in side milling and profiling. As a versatile 4 flute square end mill, it is suitable for both medium cutting and finishing in everyday CNC production.
Grade HN55 is made from ultrafine close to nanometer sized WC powder, with very high wear resistancet’s suitable for making miling、 drilling tools and reamers, for high-speed miling of materials with highhardness.
| Grade | Cobalt content % | Grain size | Density g/cm³ | Hardness HRA | Hardness HV30 | MPa Transverse rupture strength | MPa ·m1/2 Fracture toughness MPa ·m1/2 |
|---|---|---|---|---|---|---|---|
| HN55 | 9 | 0.3 | 14.50 | 93.8 | 1,960 | 3,800 | 8.0 |
| Scientific name | Composition | Physical properties | Features | Typical applications |
|---|---|---|---|---|
| AlCrSiN | Aluminium–chromium–silicon nitride coating containing Si | Hardness: not clearly specified, but the presence of Si significantly increases hardness and toughness (estimated HV＞3500). | Si forms a denser nanostructure, improving wear resistance and high-temperature stability. | Specially designed for drills, end mills and ball-nose mills and other shank-type tools. Suitable for machining high-hardness materials (such as quenched workpieces) and materials after heat treatment. |
A square end mill has a flat cutting edge and produces sharp 90° corners, making it ideal for slotting, side milling and pocketing. It is widely used in general machining of steel, stainless steel and aluminum.
An hrc45 square end mill is suitable for general steels and pre-hardened steels.
Hrc55 square end mill tools are used for higher-strength steels and longer tool life.
Hrc65 solid carbide square end mill is designed for hard milling of hardened tool steel and die steel where wear resistance is critical.
A square end mill corner radius has a small radius at the corner instead of a perfectly sharp edge. This radius helps reduce chipping, improves tool life and gives a slightly stronger cutting edge, especially useful in harder steels and continuous production.
Yes, we are a square end mill factory and wholesale square end mill manufacturer, offering both standard sizes and customized geometries. Coatings, flute numbers, corner radius and HRC grades can be tailored to your specific machining requirements.
Yes.
Yes. We can produce non-standard tools according to your drawings, samples or machining requirements (material, coating, size, tolerance and application). Our engineers will evaluate and provide a quotation and lead time.
For serious buyers and distributors, we can offer free standard samples if in stock. Usually you only need to cover the freight cost. For customized tools, a sample fee may apply, which can be refunded or deducted in bulk orders.
Regional or customer protection based on sales targets, avoiding price wars among our partners.
Catalogs, brochures, product photos, technical data sheets, online materials.
For key partners, joint promotion, exhibitions and digital marketing support.
Safety stock for fast-moving items and forecast-based production.
Priority production and regular shipments to reduce stock-out risk.
Clear quality warranty policy, quick response to claims.
Replacement, credit or other solutions after confirmation of issues.
Tool selection and cutting parameter advice.
Problem analysis for different materials and machines.
Online training, documents, and when possible, on-site support for key accounts.
GM Series 4 flutes square end mill is a high-performance square end mill for precise machining of alloy steel, pre-hardened steel and stainless steel up to about 55HRC. The solid carbide square end mill construction, optimized flute geometry and wear-resistant coating ensure stable cutting, good chip control and long tool life in side milling, profiling and finishing. It is ideal for high-speed CNC applications where dimensional accuracy and surface quality are important.It is also available as an hrc45 square end mill grade, offering a tougher cutting edge for general-purpose machining and more forgiving performance in everyday production.
Grade HN40 is made from submicron WC powder, some speclal additlves added to optimize theproperties with good combination of hardness and toughness.
Its suitable for making drills and miling tools for machining stainless steel, tool steel and heat-resistingalloys.
| Grade | Cobalt content % | Grain size | Density g/cm³ | Hardness HRA | Hardness HV30 | MPa Transverse rupture strength | MPa ·m1/2 Fracture toughness MPa ·m1/2 |
|---|---|---|---|---|---|---|---|
| HN40 | 10 | 0.8 | 14.45 | 91.8 | 1,580 | 3,600 | 11.8 |
| Scientific name | Composition | Physical properties | Features | Typical applications |
|---|---|---|---|---|
| ALCRN | Al: 18–32% Cr: 10–25% N: 45–57% | Hardness: 2800–3200 HV (≈30–32 GPa) Thickness: 1–5 μm (typically 3–4 μm in applications) Oxidation temperature: 1000–1100°C (short-term up to 1100°C) Deposition temperature: ＜500°C (suitable for HSS and carbide substrates) | Red hardness: maintains hardness even at 1100°C, better than TiAlN (whose hardness drops above about 900°C). Adhesion: critical load up to 40 N (with optimized process). Wear resistance: suitable for high-speed cutting and dry machining, especially effective on stainless steels and alloy steels. | Cutting tools: end mills, gear cutters, drills (e.g. Balinit Alcorna series). Moulds: aluminium die-casting moulds, stamping tools. Industrial parts: piston rings, high-temperature wear-resistant parts (combined with suitable interlayer design). |
A square end mill has a flat cutting edge and produces sharp 90° corners, making it ideal for slotting, side milling and pocketing. It is widely used in general machining of steel, stainless steel and aluminum.
An hrc45 square end mill is suitable for general steels and pre-hardened steels.
Hrc55 square end mill tools are used for higher-strength steels and longer tool life.
Hrc65 solid carbide square end mill is designed for hard milling of hardened tool steel and die steel where wear resistance is critical.
A square end mill corner radius has a small radius at the corner instead of a perfectly sharp edge. This radius helps reduce chipping, improves tool life and gives a slightly stronger cutting edge, especially useful in harder steels and continuous production.
Yes, we are a square end mill factory and wholesale square end mill manufacturer, offering both standard sizes and customized geometries. Coatings, flute numbers, corner radius and HRC grades can be tailored to your specific machining requirements.
Yes.
Yes. We can produce non-standard tools according to your drawings, samples or machining requirements (material, coating, size, tolerance and application). Our engineers will evaluate and provide a quotation and lead time.
For serious buyers and distributors, we can offer free standard samples if in stock. Usually you only need to cover the freight cost. For customized tools, a sample fee may apply, which can be refunded or deducted in bulk orders.
Regional or customer protection based on sales targets, avoiding price wars among our partners.
Catalogs, brochures, product photos, technical data sheets, online materials.
For key partners, joint promotion, exhibitions and digital marketing support.
Safety stock for fast-moving items and forecast-based production.
Priority production and regular shipments to reduce stock-out risk.
Clear quality warranty policy, quick response to claims.
Replacement, credit or other solutions after confirmation of issues.
Tool selection and cutting parameter advice.
Problem analysis for different materials and machines.
Online training, documents, and when possible, on-site support for key accounts.
This 4-flute square end mill is made from premium solid carbide and hardened to about 60HRC for demanding stainless-steel machining. The solid carbide square end mill design with reinforced core and optimized helix helps reduce vibration, control heat and prevent edge chipping, ensuring stable cutting in side milling, slotting and profiling. It delivers reliable tool life and a fine surface finish on stainless and heat-resistant alloys in high-speed CNC applications.
Grade HN44F is made from submicron WC powder, some special additives added.
It’s suitable for making drills and end mills, especially for machining steel,Al-based alloys and Ti-basedalloys.
| Grade | Cobalt content % | Grain size | Density g/cm³ | Hardness HRA | Hardness HV30 | MPa Transverse rupture strength | MPa ·m1/2 Fracture toughness MPa ·m1/2 |
|---|---|---|---|---|---|---|---|
| HN44F | 12 | 0.4 | 14.15 | 92.6 | 1,720 | 4,200 | 9.6 |
| Scientific name | Composition | Physical properties | Features | Typical applications |
|---|---|---|---|---|
| CrAlTiSiN | Cr: 12–16% Al: 20–24% Ti: 4–8% Si: 6–10% N: 48–52% | Ultra-high hardness: hardness can reach 38–40 GPa (e.g. CrAlSiN/TiAlSiN modulated coatings), much higher than traditional TiN or CrN. Si forms amorphous Si₃N₄, which suppresses dislocation movement and improves wear resistance. Excellent high-temperature performance: oxidation temperature up to 1000–1100°C, suitable for high-speed dry cutting. At high temperature, a dense Al₂O₃ and Cr₂O₃ oxide layer forms on the surface, slowing further oxidation. Low friction coefficient: about 0.375–0.675, depending on modulation period and Si content. Strong adhesion: with transition-layer design (such as AlCrTi alloy layer), critical load can exceed 18 N (scratch test). | High-speed cutting tools: such as mills and drills, suitable for hardened steels, titanium alloys and other difficult-to-machine materials. Mould surface reinforcement: improves wear resistance and thermal-fatigue resistance of stamping dies. Aerospace components: such as turbine-blade coatings, resisting high-temperature oxidation and particle erosion. |
A square end mill has a flat cutting edge and produces sharp 90° corners, making it ideal for slotting, side milling and pocketing. It is widely used in general machining of steel, stainless steel and aluminum.
An hrc45 square end mill is suitable for general steels and pre-hardened steels.
Hrc55 square end mill tools are used for higher-strength steels and longer tool life.
Hrc65 solid carbide square end mill is designed for hard milling of hardened tool steel and die steel where wear resistance is critical.
A square end mill corner radius has a small radius at the corner instead of a perfectly sharp edge. This radius helps reduce chipping, improves tool life and gives a slightly stronger cutting edge, especially useful in harder steels and continuous production.
Yes, we are a square end mill factory and wholesale square end mill manufacturer, offering both standard sizes and customized geometries. Coatings, flute numbers, corner radius and HRC grades can be tailored to your specific machining requirements.
Yes.
Yes. We can produce non-standard tools according to your drawings, samples or machining requirements (material, coating, size, tolerance and application). Our engineers will evaluate and provide a quotation and lead time.
For serious buyers and distributors, we can offer free standard samples if in stock. Usually you only need to cover the freight cost. For customized tools, a sample fee may apply, which can be refunded or deducted in bulk orders.
Regional or customer protection based on sales targets, avoiding price wars among our partners.
Catalogs, brochures, product photos, technical data sheets, online materials.
For key partners, joint promotion, exhibitions and digital marketing support.
Safety stock for fast-moving items and forecast-based production.
Priority production and regular shipments to reduce stock-out risk.
Clear quality warranty policy, quick response to claims.
Replacement, credit or other solutions after confirmation of issues.
Tool selection and cutting parameter advice.
Problem analysis for different materials and machines.
Online training, documents, and when possible, on-site support for key accounts.
This high-performance square end mill is made from premium carbide and hardened to 65HRC, ideal for hard milling of die steel, tool steel and alloy steel. The 4 flutes and blue nano coating give this hrc65 solid carbide square end mill excellent wear resistance, low friction and stable cutting at high speeds, helping achieve precise dimensions and a bright surface finish in finishing and light roughing.
Grade HN44F is made from submicron WC powder, some special additives added.
It’s suitable for making drills and end mills, especially for machining steel,Al-based alloys and Ti-basedalloys.
| Grade | Cobalt content % | Grain size | Density g/cm³ | Hardness HRA | Hardness HV30 | MPa Transverse rupture strength | MPa ·m1/2 Fracture toughness MPa ·m1/2 |
|---|---|---|---|---|---|---|---|
| HN44F | 12 | 0.4 | 14.15 | 92.6 | 1,720 | 4,200 | 9.6 |
| Scientific name | Composition | Physical properties | Features | Typical applications |
|---|---|---|---|---|
| Nano-Blue | Blue surface layer: may contain AlCrN (aluminium-chromium nitride) or TiSiN (titanium–silicon nitride); the blue colour comes from nano-structured interference. Nanomultilayer structure: alternating layers such as TiN/AlN (individual layer thickness ＜50 nm) to increase hardness and thermal stability. | Hardness: 3000–4000 HV (nano-indentation). Friction coefficient: 0.1–0.3 (lower when combined with DLC). Heat resistance: stable up to 1000°C (oxidation starts above 800°C). Adhesion strength: ≥70 N (critical load in scratch test). Surface roughness: Ra ＜0.05 μm (after polishing). | Blue appearance: achieved by nano-optical thin-film design, and can serve as wear indicator (colour change shows coating loss). Self-lubricating: some Si- or WC-containing nanocoatings can form a silica-based lubricating layer at high temperature. | Recommended workpiece materials High-hardness steels (HRC＞50, such as mould steel, bearing steel). High-temperature alloys (nickel-based / titanium alloys, relying on coating heat resistance). Non-ferrous metals (aluminium and copper alloys, requiring low-friction coating to prevent built-up edge). Composites (CFRP, avoiding adverse reactions between coating and fibres). Typical application fields Aerospace: machining turbine-blade dovetails, milling titanium-alloy structural parts. Automotive moulds: high-precision cavity milling, balancing efficiency and surface quality. Medical devices: micro-machining of cobalt-chromium artificial joints. |
A square end mill has a flat cutting edge and produces sharp 90° corners, making it ideal for slotting, side milling and pocketing. It is widely used in general machining of steel, stainless steel and aluminum.
An hrc45 square end mill is suitable for general steels and pre-hardened steels.
Hrc55 square end mill tools are used for higher-strength steels and longer tool life.
Hrc65 solid carbide square end mill is designed for hard milling of hardened tool steel and die steel where wear resistance is critical.
A square end mill corner radius has a small radius at the corner instead of a perfectly sharp edge. This radius helps reduce chipping, improves tool life and gives a slightly stronger cutting edge, especially useful in harder steels and continuous production.
Yes, we are a square end mill factory and wholesale square end mill manufacturer, offering both standard sizes and customized geometries. Coatings, flute numbers, corner radius and HRC grades can be tailored to your specific machining requirements.
Yes.
Yes. We can produce non-standard tools according to your drawings, samples or machining requirements (material, coating, size, tolerance and application). Our engineers will evaluate and provide a quotation and lead time.
For serious buyers and distributors, we can offer free standard samples if in stock. Usually you only need to cover the freight cost. For customized tools, a sample fee may apply, which can be refunded or deducted in bulk orders.
Regional or customer protection based on sales targets, avoiding price wars among our partners.
Catalogs, brochures, product photos, technical data sheets, online materials.
For key partners, joint promotion, exhibitions and digital marketing support.
Safety stock for fast-moving items and forecast-based production.
Priority production and regular shipments to reduce stock-out risk.
Clear quality warranty policy, quick response to claims.
Replacement, credit or other solutions after confirmation of issues.
Tool selection and cutting parameter advice.
Problem analysis for different materials and machines.
Online training, documents, and when possible, on-site support for key accounts.
We Are Commited To Providing High-Quality, Customized solutions At An Affordable price While Also Prioritizing sustainability And ExcellentCustomer Service, These Qualities Make Us A Great choice For Your Square End Mill Needs
We Only Use unground tungsten carbide rods with HlP sintering and100% virgin material. Our grade includes lsO K05 to K40, frommachining carbon steel to aluminium, non-ferrous metals andtitanium or we develop grade for your applications.
As a HNCarbide customer, you can enjoy five-axis high-precisiongrinding machines from Australia’s ANCA or Germany’s Walter. Themodern workshop with constant temperature and humidity ensuresthe accuracy of each Square End Mill
Each of your tungsten steel Square End Mill will be sandblasted toeffectively remove burrs and improve the finish.
All HNCarbide’s Square End Mill will be monitored on WALTER HELICHEEK andZOLLER GENlUS 3 to ensure that every dimension is qualified. We arecommitted to controlling the tolerance within 3 UM.
At HNCarbide, every shipment is meticulously packaged to ensure your tools arrive intact.
Each HNCarbide Solid Square End Mill is individually placed in a shock-resistant protective case, labeled with complete specifications, and sealed in moisture-proof packaging material before being boxed.
Large-volume orders are reinforced with double-wall cardboard boxes or wooden crates to maximize safety during international shipping.
We collaborate with reliable logistics partners to ensure goods are delivered quickly and securely to their destination via air freight, sea freight, or express courier.
A square end mill has a flat cutting edge and produces sharp 90° corners, making it ideal for slotting, side milling and pocketing. It is widely used in general machining of steel, stainless steel and aluminum.
An hrc45 square end mill is suitable for general steels and pre-hardened steels.
Hrc55 square end mill tools are used for higher-strength steels and longer tool life.
Hrc65 solid carbide square end mill is designed for hard milling of hardened tool steel and die steel where wear resistance is critical.
A square end mill corner radius has a small radius at the corner instead of a perfectly sharp edge. This radius helps reduce chipping, improves tool life and gives a slightly stronger cutting edge, especially useful in harder steels and continuous production.
Yes, we are a square end mill factory and wholesale square end mill manufacturer, offering both standard sizes and customized geometries. Coatings, flute numbers, corner radius and HRC grades can be tailored to your specific machining requirements.
Yes.
Yes. We can produce non-standard tools according to your drawings, samples or machining requirements (material, coating, size, tolerance and application). Our engineers will evaluate and provide a quotation and lead time.
For serious buyers and distributors, we can offer free standard samples if in stock. Usually you only need to cover the freight cost. For customized tools, a sample fee may apply, which can be refunded or deducted in bulk orders.
Regional or customer protection based on sales targets, avoiding price wars among our partners.
Catalogs, brochures, product photos, technical data sheets, online materials.
For key partners, joint promotion, exhibitions and digital marketing support.
Safety stock for fast-moving items and forecast-based production.
Priority production and regular shipments to reduce stock-out risk.
Clear quality warranty policy, quick response to claims.
Replacement, credit or other solutions after confirmation of issues.
Tool selection and cutting parameter advice.
Problem analysis for different materials and machines.
Online training, documents, and when possible, on-site support for key accounts.
Before you go, please note that we offer the most up-to-date industry research reports and the most comprehensive product catalogs, so please contact us if you are interested!
Before you go, please note that we offer the most up-to-date industry research reports and the most comprehensive product catalogs, so please contact us if you are interested!
Optimized by Seraphinite Accelerator
